By separating urine from solid waste at the source, Toilet Tech creates a much smaller solid waste stream to manage.
The remaining feces and toilet paper can either decompose onsite or be collected for removal, depending on the site's environment, access and operating requirements.

The Toilet Tech conveyor separates urine before it mixes with solid waste.
Urine is directed to an appropriate onsite treatment and dispersal system, while the remaining feces and toilet paper travel along the conveyor to one of two solid waste management systems.
Use the Toilet
Separate Urine
Convey Solids
Decompose
Solid waste drops into an open-bottom vault where native soil organisms and biological processes break it down onsite.
OR
Waste Away
Solid waste is collected in structural bags or bins for periodic removal and offsite disposal.
After urine is diverted, the remaining solid waste can either be biologically decomposed onsite or collected for removal, depending on site conditions.
Onsite Biological Decomposition
Solid waste drops into an open-bottom vault where native soil organisms and biological processes break it down onsite.
Best for: Forests, grasslands and other vegetated sites.

Decompose system installed in Mount Hood NF, OR.
Collection & Removal
Solid waste is collected in structural bags or bins for periodic removal and offsite disposal.
Best for: Alpine, desert and other sites where onsite decomposition isn't appropriate.
Waste Away installed in Death Valley NP, CA.

Designed for forests, grasslands and other vegetated environments, the Decompose system combines the Toilet Tech urine-diverting conveyor with an open-bottom vault.
After urine is separated, the remaining feces and toilet paper drop into the vault below, where they remain in contact with the native soil environment.
Native soil invertebrates, bacteria and aerobic biological processes consume and break down the accumulated solid waste over time, minimizing the amount of residual material that must be managed.
Key features
-
Lowest residual waste volume
-
No bulking agent required
-
Onsite storage capacity of 10–20 years
-
Designed for onsite biological decomposition
-
Suitable for forests, campgrounds, subalpine sites, remote parking areas and some frontcountry sites

Open-Bottom. Lightweight. Built for Remote Sites.
The Decompose Vault (DCV) is a prefabricated, open-bottom vault made from fiberglass (FRP). The open bottom keeps accumulated solid waste in contact with the native soil environment, where soil invertebrates and bacteria contribute to biological decomposition.
FRP provides a lightweight, concrete-free alternative for remote locations where transporting concrete ingredients, mixing and pouring can be difficult and labor intensive.
Because Toilet Tech separates urine before it reaches the vault, the DCV receives solid waste without the large volume of liquid associated with conventional mixed-waste systems.
Vault features
-
Prefabricated fiberglass (FRP)
-
Lightweight and concrete-free
-
50+ year life
-
Available in 2–4 ft. deep sections
-
Open-bottom soil contact

Cross section view of a Decompose vault model.

No Waste Hauling
The Decompose system is intended to manage the remaining solid waste at the site rather than routinely transporting it elsewhere.
Decompose vault at Lawn Lake RMNP, CO.

Open-Bottom Design
The fiberglass vault maintains contact between the accumulated solid waste and the native soil environment below.
Vault at Boulder Lake, Mt Hood NF, OR.

Prefabricated Construction
Lightweight fiberglass vault components can simplify transportation and installation compared with site-built concrete structures.
Fiberglass reinforced plastic vault.
Designed for alpine, desert and other environments where onsite decomposition isn't appropriate, Waste Away combines the Toilet Tech urine-diverting conveyor with a containerized collection system.
After urine is separated, the remaining feces and toilet paper are collected in structural bags or bins beneath the conveyor for periodic removal and offsite disposal. Because urine has already been diverted, operators handle a much smaller solid waste stream than with traditional mixed-waste collection systems.
Waste Away has been used at high-use alpine sites including Mt. Rainier National Park, Longs Peak in Rocky Mountain National Park and the Angels Landing Trail in Zion National Park.
Key features
-
No-touch collection system
-
No bulking agent required
-
Easy storage, removal and disposal
-
No onsite decomposition required
-
Suitable for remote backcountry, high-alpine and extreme desert sites

Accessible Storage for Collection & Removal
The Waste Away Vault is an above- or below-ground collection area designed to contain structural bags or bins beneath the BTW conveyor drop point.
The enclosed storage space keeps collected solid waste accessible for periodic removal and offsite disposal. Waste Away collection areas can be incorporated into Toilet Tech buildings and custom structures based on the site's access and operating requirements.
Unlike Decompose, no biological decomposition is intended to occur within the Waste Away system.
Vault features
-
Above- or below-ground configurations
-
Fully enclosed collection area
-
Structural bags or bins
-
Accessible for safe removal
-
No onsite decomposition
-
Designed for remote and extreme environments

Cross section view of a Waste Away model.

Bags
Suitable collection configurations can use removable bags for handling the remaining solid waste.
Waste Away bag system.

Barrels or Bins
Containerized systems can be configured around the site's access and removal method.
Waste Away barrel at Camp Muir, WA.

Site-Specific Enclosures
Waste Away collection areas can be incorporated into full buildings or minimal wilderness structures depending on the site.
Zion's Angel's Landing Waste Away system.

Every site is different. Tell us about your environment, access, visitation and project requirements, and we'll help identify the Toilet Tech waste-management approach best suited to your project.
